HEYLOVE. Frame builder Gel, Coral Blush

FRAME Gel is a universal nail extension gel available in 13 shades.

Packaged in a jar with a pump dispenser.

Coral blush— beige-pink.

Characteristics:

• For sculpting, corrections, strengthening, and file-free nail extensions.
• Medium consistency, closer to a thinner viscosity.
• Self-leveling.
• Flexible in a thin layer, while in a thicker layer it maintains the apex and does not deform.
• Creates a strong coating that is resistant to chipping.

Directions for use:

1. Buff the nail plate with a 180-grit file or a 100-grit buffer.

2. Remove dust using a nail cleanser, paying special attention to the cuticle area and sidewalls.

3. Apply dehydrator and wait 30 seconds for the moisture to evaporate.

4. Using rubbing motions, apply a thin priming layer of Rubber Base, then add a little more base to create a smooth surface. Cure for 30 seconds.

5. Press the pump and dispense the required amount of product.

6. Apply Frame Gel as a structural layer or place it into an upper or lower nail form, depending on the technique used.

7. Cure each nail for 30 seconds, then cure both hands again for 1–2 minutes.

8. Remove the sticky layer from the Frame Gel and refine the surface with filing if necessary.

9. Apply No Sticky Top or Dark Story Top Coat and cure for 1–2 minutes.

Consistency: Medium

Volume: 30 ml

Manufacturer: TM "HEYLOVE"

Country of origin: Ukraine

Ingredients (INCI):
Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments.

May contain:
CI 77499, CI 77891, CI 15850, CI 45380, CI 47005, CI 15510.

Warning!

To prevent unwanted curing of the material during work, testing, or content creation, keep the open bottle or brush as far away from daylight as possible, especially direct sunlight.

Please note that even on cloudy days, clouds allow enough ultraviolet radiation to pass through to initiate polymerization.

When painting nail tips, we recommend keeping the working side of the UV lamp facing away from the technician.

If the lamp is directed toward the technician while switched on, unwanted curing of the material may occur on the brushes and around the necks of open bottles.