HEYLOVE. Smart gel, Vanilla, 15 ml, liquid builder gel

Vanilla is a milky cream shade associated with softness and purity.

A liquid builder gel in a bottle. Designed for fast nail extensions without filing, strengthening natural nails, leveling, and correcting imperfections of the nail plate.

During curing, the product does not heat up and does not cause discomfort.

Collection: Tactile

Consistency: Thin

Hardness/Elasticity: Medium elasticity

Application method:

1. Buff the nail plate using a 180-grit file or a 100-grit buffer.

2. Remove dust with a nail cleanser, paying special attention to the cuticle area and sidewalls.

3. Apply the pH Bond dehydrator and wait 30 seconds for the moisture to evaporate.

4. Apply a rubbing layer of Rubber Base, then add a small amount of base to create a smooth surface. Cure for 30 seconds.

5. Remove the dispersion (sticky) layer from the base after curing, especially around the cuticle area.

6. Apply Smart Gel using the architectural method. Cure for 30 seconds, then cure both hands together for an additional 1 minute.

7. Remove the sticky layer from the Smart Gel.

8. Perform surface filing if desired and be sure to file the free edge to create the gel thickness.

9. Apply the finishing coating (top) as the final layer. Cure for 1–2 minutes.

10. Using a carbide "corn" bit, file the natural nail from underneath in the free edge area.

11. Carefully buff the free edge to avoid damaging the surface of the coating.

12. Wipe away dust with a damp wipe and apply cuticle oil and hand care products. Done!

Volume: 15 ml

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phosphinate, Hydroxycyclohexyl Phenyl Ketone. May Contain: CI 45380, CI 15850, CI 77491, CI 15985, CI 77492, CI 77007, CI 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 77000.

Warning! To avoid unwanted polymerization of the material during work, testing, or content creation, the opened bottle or brush must be kept as far away from daylight as possible, especially from direct sunlight. Please also note that even in cloudy weather, clouds allow a large amount of ultraviolet radiation to pass through, which is sufficient for the material to begin polymerizing. When painting tips, we recommend keeping the working side of the operating UV lamp facing away from the technician. If the switched-on lamp is directed toward the technician, unwanted polymerization of the material may occur on the brushes and around the necks of opened bottles.