HEYLOVE. Tint base, SODA, 15 ml

Shade: White

Collection: POP DRINKS

Consistency: Medium

Hardness/Elasticity: Elastic

Acidity: Neutral, pH 6.7

Odor: Neutral

Pigmentation: Highly pigmented, covers the free edge.

Application method:

1. Thoroughly degrease the nail plate using the pH Bond dehydrator.

2. Apply Ultrabond acid-free primer to the free edge of the nail and wait until the liquid has completely dried.

3. Apply a layer of clear Rubber Base as a foundation and cure for 30 seconds.

4. Apply one or two coats of Tint Base. Cure in a UV/LED lamp for 60 seconds.

5. Finish with a top coat.

Volume: 15 ml

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica.

May Contain: CI 45380, CI 15850, CI 77491, CI 15985, CI 77492, CI 77007, CI 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 77000.

Warning!

To prevent unwanted curing of the product during application, testing, or content creation, keep the opened bottle or brush as far away from daylight as possible, especially direct sunlight.

Please note that even on cloudy days, clouds allow a significant amount of ultraviolet radiation to pass through, which is enough to initiate curing.

When painting display tips, we recommend positioning the working side of the operating UV lamp away from the technician.

If the lamp is facing the technician, unwanted curing may occur on the brush and around the neck of opened bottles.

How to prevent bubbles in the product?

Bubbles can appear in any liquid. This does not depend on the formula or ingredients. It depends on the product's viscosity. It is simply the law of physics.

For example, bubbles in water disappear very quickly on their own.

In thicker liquids (such as honey or builder gel), bubbles remain much longer and do not escape as easily as they do in water.

The same applies to base coats. If you handle the brush roughly by dipping it sharply into the bottle, it acts like a blender, mixing air into the product and creating bubbles. This is especially common with products packaged in bottles with built-in brushes.

Therefore, always use gentle, careful brush movements, especially when the bottle is new and full.

When developing our Tint Base, we intentionally selected a medium consistency because it offers several advantages:

- The product does not run or flood the cuticles.
- Clean, precise application with minimal effort.
- Gives the technician enough time to build the architecture and check the reflection.
- No need for a second coat to perfect the apex or cover the free edge.

Our production process uses equipment that prevents bubble formation throughout every stage, from pigment mixing to filling the bottles.

We also ask our retail partners not to open bottles for customers to demonstrate the product.

A consultant who is not a nail technician may unintentionally create bubbles by handling the brush incorrectly.

Additionally, bottles look less professional when the neck is covered with product.

What should you do if bubbles appear?

Open the bottle, but do not remove the brush.

Leave the bottle in a warm (not hot) place overnight.

Alternatively, place the bottle in a plastic bag and immerse it in warm water up to the bottle neck.

According to the laws of physics, molecules move faster in a warm environment, accelerating the process.

The trapped air will rise to the surface because it is lighter than the liquid.